To order parts by phone:
1-800-475-5660

Product Spotlight

Welcome to M & S Service and Supply Company's product spotlight page.

The Giant GXH2525A-111H Pump

We would like to introduce you to the history behind the design of the Giant GXH2525A-111H consumer replacement pump offered to you by our company.

In the Spring of 2003 with the introduction of the new Ex-Cell HA2425 Pressure Washer, it did not take long to see there was going to be a need for a much higher quality, longer lasting replacement pump to replace to the Oil-Free Twin Cylinder Strap style D22306 / D21250 pumps that were coming on the EXHA2425 and HA2425-1 Pressure Washers being made by DeVilbiss.

The design of the Honda Engine and the short 7/8 output shaft made for a challenge to design a high quality oil lubricated replacement pump that could be a bolt on replacement for the Ex-Cell D22306 Oil-Free Strap Cylinder pump.

Our lead service engineer contacted Giant Industries and American Company located in Toledo, Ohio and along with their research and development team efforts combined to deliver the first prototype Giant GXH2525A-111H pump for testing.

After several changes to the Giant GXH2525A-111H pump and countless hours of testing under vary conditions the two companies felt they had a very high quality and cost effective replacement pump with the GXH2525A-111H pump.

Shortly after this the New Giant GXH2525A-111H went into production and the first skid of pressure washer replacement pumps were delivered to M & S Service Company Inc by Giant Industries.

Since that time Giant Industries has produced thousands of GXH2525A-111H replacements to replace the Oil-Free Strap Cylinder D22306 pumps from their 90,000 square foot manufacturing and distribution center located in Ohio.

The Giant GXH2525A-111H Consumer replacement pump has been designed, engineered and tested for quality by our two companies and is now pleasing customers all over the world as the number one replacement pump offered for the Oil-Free Strap Cylinder Pumps and is preferred over the original equipment pump these series of pressure washer came with.

The Giant GXH2525A-111H replacement pump is a direct fit replacement pump for many of the following model number pumps used on horizontally mounted engines:

D21250 DeVilbiss, Ex-Cell 2.2 GPM 2300 PSI Oil Free Strap Pump.
D22306 DeVilbiss, Ex-Cell 2.4 GPM 2400 PSI Oil Free Strap Pump.
D24856 DeVilbiss, Ex-Cell 2.5 GPM 2500 PSI Oil Free Strap Pump.
D26775 DeVilbiss, Ex-Cell 2.5 GPM 2500 PSI Oil Free Strap Pump.
D26776 DeWalt, DeVilbiss, Ex-Cell 2.5 GPM 2500 PSI Oil Free Strap Pump.
D27916 DeWalt, DeVilbiss, Ex-Cell 2.5 GPM 2500 PSI Oil Free Strap Pump.
D27983 DeWalt, DeVilbiss, Ex-Cell 2.5 GPM 2500 PSI Oil Free Strap Pump.
D27984 DeWalt, DeVilbiss, Ex-Cell 2.5 GPM 2500 PSI Oil Free Strap Pump.
D28744 Porter Cable, DeVilbiss, Ex-Cell 2.5 GPM 2500 PSI Oil Free Strap Pump.
D28745 Porter Cable, DeVilbiss, Ex-Cell 2.5 GPM 2500 PSI Oil Free Strap Pump.
A01801 DeWalt, Porter Cable, Ex-Cell 2.5 GPM 2600 PSI Oil Free Strap Pump.
A14292 DeWalt, Porter Cable, Ex-Cell 2.5 GPM 2600 PSI Oil Free Strap Pump.

It is important to remember this GHX2525A-111H is design as a horizontally mounted replacement pump and is not designed to be used in a vertical mounted application.

M & S Service Company Inc has also gone beyond the original designed and added all of the required fitting to make the Giant GXH2525A-111H pump a quick and simple replacement for your current pump with no hassles trying to go find additional parts for a proper replacement. These parts along with our illustrated pump replacement instruction will insure your pump is replaced correctly and with very little effort.

Our replacement Giant pump GXH2525A-111H comes with the following:

Packaged as Kit-GXH26

Giant GXH2525A-111H Horizontal Radial-Axial series Pump
Direct Drive with 4 bolt gas mounting flange.
Max. Volume: 2.5 GPM.
Max. Discharge Pressure: 2,650 PSI
Max. Pump Speed: 3450 RPM.
Shaft Diameter: 7/8" Keyed Hollow Shaft.
Max. Horsepower Requirements: 6.5 GHP
Max. Fluid Temp.: 80 degrees F.
Inlet Ports (1): 1/2" NPT Swivel Fitting.
Discharge Ports (1): 3/8" NPT Fitting.

Comes with Built-In Adjustable Unloader.
Thermal Relief Valve.
Chemical Injector.
5/16 Drive Key.
Inlet Screen Washer.
New High Quality 3/8 Brass Female Quick connector.
Illustrated Pump Replacement Instructions.
Correct Illustrated Part Diagram.

The Giant GXH2525A-111H is packaged as a kit by M & S Service Company Inc and is sold under the part number KIT-GXH26 due to many other companies now purchasing the Giant GXH2525A-111H and selling the pump as a replacement pump but not including the proper fittings required for the customer to properly replace their existing Oil-Free Strap Cylinder Pump.

M & S Service Company recommends using the Giant GXH2525A-111H / KIT-GXH26 on the following model numbers made by DeWalt, Black and Decker, DeVilbiss, Ex-Cell, Porter Cable, Sears, Husky, Home Depot, and some others under private label names:

DVH2600 DeWalt Pressure Washer 2600 PSI 2.5 GPM with A14292 pump.
DVH2600-1 DeWalt Pressure Washer 2600 PSI 2.5 GPM with A14292 pump.
EXHA2425 Ex-Cell Pressure Washer 2400 PSI 2.5 GPM with D22306 pump
EXHA2425-1 Ex-Cell Pressure Washer 2400 PSI 2.5 GPM with D24856 pump
EXHA2425-2 Ex-Cell Pressure Washer 2400 PSI 2.5 GPM with D26766 pump
EXHA2425-WK Ex-Cell Pressure Washer 2400 PSI 2.5 GPM with D24856 pump
EXHA2425-WK-1 Ex-Cell Pressure Washer 2400 PSI 2.5 GPM with D26776 pump
XC2600 2600 ExCell Pressure washer 2600 PSI 2.5 GPM with A14292 pump.
XR2500 ExCell Pressure washer 2500 PSI 2.5 GPM with D27983 pump.
XR2500-1 ExCell Pressure washer 2500 PSI 2.5 GPM with D27983 pump.
XR2500-2 ExCell Pressure washer 2500 PSI 2.5 GPM with D27983 pump.
XR2500-DS ExCell Pressure washer 2500 PSI 2.5 GPM with D27983 pump.
XR2600 Ex-Cell Pressure washer 2600 PSI 2.5 GPM with A01801 pump.
XR2600-1 Ex-Cell Pressure washer 2600 PSI 2.5 GPM with A07846 pump.
XR2600-2 Ex-Cell Pressure washer 2600 PSI 2.5 GPM with A07846 pump.
XR2625 Ex-Cell Pressure washer 2600 PSI 2.5 GPM with A14292 pump.

This unit takes an additional fitting for proper water intake.

XR2625-1 Ex-Cell Pressure washer 2600 PSI 2.5 GPM with A14292 pump.

This unit takes an additional fitting for proper water intake.

M & S Service continues to provide the best possible customer service and replacement parts for every pressure washer application to insure a long lasting relationship with all of our customers and will make every attempt to help provide any technical service required in the repair and replacement of your pressure washer pump.

Giant GXH2525A-111H Pump downloads

Owners manual | Mounting Instructions